All products

Steel return Idler
Shell: 159 mm Ø × 4.85 mm Wall × 420 mm Length
Shaft: 25 mm Ø (Bearing) / 18 mm Ø (Fitting)

Steel return Idler Return
Shell: 159 mm Ø × 3.5 mm Wall × 965 mm Length
Shaft: 25 mm Ø (Bearing) / 18 mm Ø (Fitting)

Frequency inverter for controlling asynchronous AC motors.
50-60 +/- 5% [Hz], 159 [A]
Output: 0-599 [Hz], 177 [A]

Electric motor with Be32 brake and V4 forced ventilation.
37Kw, 1482 r/min, 50HZ

Frequency inverters for controlling asynchronous AC motors
11,00 kW. 15,00 HP.
Output: 20-480 [V]. 24 [A]. 0-500 [Hz]

Ferramenta de prensagem compacta Ridgid RP 240
• Capacity: ½" – 11
/4" (Cu & SS);
½" – 1½" (PEX);
½" – ¾"(Steel)
• Power: 12V Advanced Lithium 2.5 Battery
• Weight: 4.8 lbs (Tool Only)
5.2 lbs (Tool w/Battery)
7.4 lbs (Tool w/Battery & ½" Cu Jaw)
• Length: RP 240: 13.0"
• Height: RP 240: 9.5"
• Crimp Cycle Time: ~5 seconds
• Lighting: Large LED-light for no or low-light environments
• Charge: 140 crimps per charge
• Model Design: RP 240: Ergonomic handle designed for tool controls

Decentralized frequency inverter for controlling asynchronous motors.
0.55kW (0.75HP), Profibus DP (Classic), 3-phase 380{V} - 500V AC, 2.0A AC

Helical-Bevel Gearmotor: High-efficiency IE3 motor with electromagnetic brake and manual release lever.
1468 / 53 [r/min] , 27,88 [I], 1360 [Nm], M1B, 7.5 [kW], 50 [Hz] , BGE1.5, 525 [V] / conn. type delta

Helical gear unit
1400 / 43 [r/min], 32,47 [I], 130 [Nm], M1

Moto-vibrador elétrico de corrente alternada (CA), trifásico, potência 0,16 kW, 2 polos, força centrífuga de até 187 kgf (1,84 kN), carcaça em alumínio, proteção IP66.

Helical-worm gearmotor
1.1 kW, 3-phase,4-pole, Hollow shaft

Helical-bevel gearmotor
0,37 kW, 4P,

Gas driven single point automatic lubricator

Hisense Televisor 50" Smart 4k UHD Dolby Vision DTS Virtual X 50A6H / 50A6K

Tanque de agua com capacidade de 13.5 mil Litros

Backstop

Side Mounting 1600W 230V 50/60Hz Outdoor Panel cooler RAL7035

Defy Slimline Stove TC 65CM HOB

Gearmotor
0.37 [kW], 73.96 [I], 1415/19 [r/min], 185 [Nm], M1, 50[Hz]

MOVIFIT electronics box
Classic, PROFINET, 0.55KW, 0.75HP

Pin. shaft 5 K97 MN3,0 Z16 L76